Sr.
No. |
Particulars |
|
Specification for FAN Mukta Wind Ventilator 600mm Throat
Dia. |
1) |
Vanes |
Vanes made
out of FRP (Glass Fibre Reinforced Plastic) UV
Stabilized Isopthalic Resin . No. of Vanes: 42 nos.
Thickness of vanes: 2mm (+/-0.2mm) |
2) |
Top
Plate |
Top Plate
made out of FRP(Glass Fibre Reinforced Plastic) UV
Stabilized Isopthalic Resin .Dia. Of Top Plate: 500mm
(+/-5mm)
Thickness of Top Plate: 2mm (+/-0.2mm) |
3) |
Bottom Ring |
Bottom Ring
made out of FRP(Glass Fibre Reinforced Plastic) UV
Stabilized Isopthalic Resin.Dia. Of Bottom Ring:
600mm (+/-5mm) Thickness of Bottom Ring:
2mm (+/-0.2mm) |
4) |
Fan
Spoke Assembly |
Fan Spoke
assembly made out of SS 316 L Rod. Dia. of Fan Spoke
Rod: 5mm. |
5) |
Bottom Ring Cross Bracket |
Bottom Ring
Cross Bracket made out of SS 316 L Flat.
Size of Cross Bracket Flat: 18 X 3mm |
6) |
Shaft |
Shaft made
out of SS316 L Rod 12 mm Dia. |
7) |
Shaft Casing |
Shaft
Casing made out of (UV Stabilised) U-PVC pipe,
32mm Dia.(min), 2 mm Thk (min.) |
8) |
Shaft Bottom Cap |
Shaft
Bottom Cap made out of Polypropylene ( PP ),
Internal Dia- 34mm, Outer Dia-36mm,
1mm Thk. |
9) |
Bearing |
2 nos.
Permanently sealed & lubricated Bearing of Type 6001 ZZ. |
10) |
Rivet |
SS 304 |
|
Specification for BASE PLATE for Mukta Wind Ventilator
600mm Throat Dia. |
1) |
FRP (Glass
Fibre Reinforced Plastic) UV Stabilized Isopthalic
Resin . Translucent Type. Confirming to match existing
roof sheet profile.
Size of Base Plate: 1.050 W X 1.6 L Mtrs.
Height of Throat: Higher side- 400mm;
Lower side- 310mm
( +/- 5mm)
Top Dia of Throat: 590mm ( +/- 5mm)
Thickness of Base Plate: 2mm (+/- 0.3 mm) |
